Detritus Wiki

User Tools

Site Tools

Trace: • centiloid
neuroimagen:centiloid

This is an old revision of the document!

Table of Contents

SUVR a Centiloid

18F-Florbetaben PET beta-amyloid binding expressed in Centiloids

Modelo lineal

Segun Rowe et. al. la transformacion de SUVR_FBB a Centiloid sigue la relación,

$ CL = 153.4 \times SUVR_{FBB} - 154.9 $

Esto es sencillo de implementar pero antes hay que calibrar el metodo de obtencion de SUVR de la pipeline con las imagenes procedentes de GAAIN.

Procesando GAAIN

Basicamente descargamos las imagenes y los valores de centiloid calculados en GAAIN,

https://www.gaaindata.org/data/centiloid/FBBproject_E-25_MR.zip

https://www.gaaindata.org/data/centiloid/FBBproject_E-25_FBB_90110.zip

https://www.gaaindata.org/data/centiloid/FBBproject_SupplementaryTable.xlsx

Y hemos de compara los valores de centiloid obtenidos por nuestra pipeline con los valores obtenidos en GAAIN.

Voy a hacer un proyecto nuevo para esto y voy a copiar alli todos los archivos. Las imagenes vienen DICOM, asi que hay que convertirlas, 

[osotolongo@detritus centiloid]$ tree MRDCM/
MRDCM/
├── 1008_MR
│   ├── 100.dcm
│   ├── 101.dcm
│   ├── 102.dcm
│   ├── 103.dcm
│   ├── 104.dcm
│   ├── 105.dcm
│   ├── 106.dcm
│   ├── 107.dcm
│   ├── 108.dcm
│   ├── 109.dcm
│   ├── 10.dcm
........
 
[osotolongo@detritus centiloid]$ tree FBBDCM/
FBBDCM/
├── 1008_PET_FBB
│   ├── 10.dcm
│   ├── 11.dcm
│   ├── 12.dcm
│   ├── 13.dcm
│   ├── 14.dcm
│   ├── 15.dcm
│   ├── 16.dcm
│   ├── 17.dcm
│   ├── 18.dcm
│   ├── 19.dcm
│   ├── 1.dcm
..............

Alla vamos. Creo el csv del proyecto, 

[osotolongo@detritus centiloid]$ ls MRDCM/ | sed 's/\(.*\)_MR/\1;sub/' > centiloid.csv

A ver como convertimos, 

[osotolongo@detritus centiloid]$ dcm2niix -z y -o tmp/ MRDCM/1008_MR/
Chris Rorden's dcm2niiX version v1.0.20180622 (JP2:OpenJPEG) (JP-LS:CharLS) GCC5.5.0 (64-bit Linux)
Found 176 DICOM file(s)
Convert 176 DICOM as tmp/1008_MR_t1_mprage_sag_p2_iso_1.0_20161003101650_2 (256x256x176x1)
compress: "/usr/local/mricron/pigz_mricron" -n -f -6 "tmp/1008_MR_t1_mprage_sag_p2_iso_1.0_20161003101650_2.nii"
Conversion required 1.217848 seconds (0.450000 for core code).
[osotolongo@detritus centiloid]$ ls tmp/
1008_MR_t1_mprage_sag_p2_iso_1.0_20161003101650_2.json	1008_MR_t1_mprage_sag_p2_iso_1.0_20161003101650_2.nii.gz
 
[osotolongo@detritus centiloid]$ for x in MRDCM/*; do y=$(echo ${x} | sed 's/.*\/\(.*\)_.*/sub\1s0001/'); dcm2niix -z y -o tmp/ ${x}; t=$(ls tmp/*.nii.gz); mv ${t} mri/${y}.nii.gz; mv ${t%.nii.gz}.json mri/${y}.json; done
 
[osotolongo@detritus centiloid]$ ls mri
sub1008s0001.json    sub1015s0001.json	  sub1022s0001.json    sub1026s0001.json    sub1030s0001.json	 sub1034s0001.json    sub1038s0001.json    sub2017s0001.json	sub2032s0001.json
sub1008s0001.nii.gz  sub1015s0001.nii.gz  sub1022s0001.nii.gz  sub1026s0001.nii.gz  sub1030s0001.nii.gz  sub1034s0001.nii.gz  sub1038s0001.nii.gz  sub2017s0001.nii.gz	sub2032s0001.nii.gz
sub1009s0001.json    sub1018s0001.json	  sub1023s0001.json    sub1028s0001.json    sub1031s0001.json	 sub1036s0001.json    sub2002s0001.json    sub2029s0001.json
sub1009s0001.nii.gz  sub1018s0001.nii.gz  sub1023s0001.nii.gz  sub1028s0001.nii.gz  sub1031s0001.nii.gz  sub1036s0001.nii.gz  sub2002s0001.nii.gz  sub2029s0001.nii.gz
sub1010s0001.json    sub1019s0001.json	  sub1024s0001.json    sub1029s0001.json    sub1032s0001.json	 sub1037s0001.json    sub2005s0001.json    sub2030s0001.json
sub1010s0001.nii.gz  sub1019s0001.nii.gz  sub1024s0001.nii.gz  sub1029s0001.nii.gz  sub1032s0001.nii.gz  sub1037s0001.nii.gz  sub2005s0001.nii.gz  sub2030s0001.nii.gz
 
[osotolongo@detritus centiloid]$ dcm2niix -z y -o tmp/ FBBDCM/1008_PET_FBB/
Chris Rorden's dcm2niiX version v1.0.20180622 (JP2:OpenJPEG) (JP-LS:CharLS) GCC5.5.0 (64-bit Linux)
Found 90 DICOM file(s)
Convert 90 DICOM as tmp/1008_PET_FBB_Austin_18F_Neuro_Res_20160627143414_43180 (128x128x90x1)
compress: "/usr/local/mricron/pigz_mricron" -n -f -6 "tmp/1008_PET_FBB_Austin_18F_Neuro_Res_20160627143414_43180.nii"
Conversion required 1.233496 seconds (0.170000 for core code).
[osotolongo@detritus centiloid]$ ls tmp
1008_PET_FBB_Austin_18F_Neuro_Res_20160627143414_43180.json  1008_PET_FBB_Austin_18F_Neuro_Res_20160627143414_43180.nii.gz
 
[osotolongo@detritus centiloid]$ for x in FBBDCM/*; do y=$(echo ${x} | sed 's/.*\/\(.*\)_PET_FBB/sub\1s0001/'); dcm2niix -z y -o tmp/ ${x}; t=$(ls tmp/*.nii.gz); mv ${t} fbb/${y}.nii.gz; mv ${t%.nii.gz}.json fbb/${y}.json; done
[osotolongo@detritus centiloid]$ ls fbb
sub1008s0001.json    sub1015s0001.json	  sub1022s0001.json    sub1026s0001.json    sub1030s0001.json	 sub1034s0001.json    sub1038s0001.json    sub2017s0001.json	sub2032s0001.json
sub1008s0001.nii.gz  sub1015s0001.nii.gz  sub1022s0001.nii.gz  sub1026s0001.nii.gz  sub1030s0001.nii.gz  sub1034s0001.nii.gz  sub1038s0001.nii.gz  sub2017s0001.nii.gz	sub2032s0001.nii.gz
sub1009s0001.json    sub1018s0001.json	  sub1023s0001.json    sub1028s0001.json    sub1031s0001.json	 sub1036s0001.json    sub2002s0001.json    sub2029s0001.json
sub1009s0001.nii.gz  sub1018s0001.nii.gz  sub1023s0001.nii.gz  sub1028s0001.nii.gz  sub1031s0001.nii.gz  sub1036s0001.nii.gz  sub2002s0001.nii.gz  sub2029s0001.nii.gz
sub1010s0001.json    sub1019s0001.json	  sub1024s0001.json    sub1029s0001.json    sub1032s0001.json	 sub1037s0001.json    sub2005s0001.json    sub2030s0001.json
sub1010s0001.nii.gz  sub1019s0001.nii.gz  sub1024s0001.nii.gz  sub1029s0001.nii.gz  sub1032s0001.nii.gz  sub1037s0001.nii.gz  sub2005s0001.nii.gz  sub2030s0001.nii.gz

Preparamos y lanzamos FS, 

[osotolongo@detritus centiloid]$ fsl2fs.pl centiloid
 
[osotolongo@detritus centiloid]$ precon.pl centiloid
Submitted batch job 15673
[osotolongo@detritus centiloid]$ squeue
             JOBID PARTITION     NAME     USER ST       TIME  NODES NODELIST(REASON)
             15673     devel fs_recon osotolon PD       0:00      1 (Dependency)
             15648     devel fs_recon osotolon  R       0:05      1 brick01
             15649     devel fs_recon osotolon  R       0:05      1 brick01
             15650     devel fs_recon osotolon  R       0:05      1 brick01
             15651     devel fs_recon osotolon  R       0:05      1 brick01
             15652     devel fs_recon osotolon  R       0:05      1 brick01
             15653     devel fs_recon osotolon  R       0:05      1 brick01
             15654     devel fs_recon osotolon  R       0:05      1 brick01
             15655     devel fs_recon osotolon  R       0:05      1 brick01
             15656     devel fs_recon osotolon  R       0:05      1 brick01
             15657     devel fs_recon osotolon  R       0:05      1 brick01
             15658     devel fs_recon osotolon  R       0:05      1 brick01
             15659     devel fs_recon osotolon  R       0:05      1 brick01
             15660     devel fs_recon osotolon  R       0:05      1 brick01
             15661     devel fs_recon osotolon  R       0:05      1 brick01
             15662     devel fs_recon osotolon  R       0:05      1 brick01
             15663     devel fs_recon osotolon  R       0:05      1 brick01
             15664     devel fs_recon osotolon  R       0:02      1 brick01
             15665     devel fs_recon osotolon  R       0:02      1 brick01
             15666     devel fs_recon osotolon  R       0:02      1 brick01
             15667     devel fs_recon osotolon  R       0:02      1 brick01
             15668     devel fs_recon osotolon  R       0:02      1 brick01
             15669     devel fs_recon osotolon  R       0:02      1 brick01
             15670     devel fs_recon osotolon  R       0:02      1 brick01
             15671     devel fs_recon osotolon  R       0:02      1 brick01
             15672     devel fs_recon osotolon  R       0:02      1 brick01

Ahora, las imagenes PET vienen en formato distinto al usado habitualmente (1 solo slice de 20 min) por lo que hay que retocar el script fbbtemp_reg.sh un poco para añadirle la posibilidad de proesar esto correctamente.

fbbtemp_reg.sh
#!/bin/sh
 
study=$1
shift
 
id=$1
shift
 
tdir=$1
shift
 
wdir=$1
shift
 
items=(`ls ${tdir}/${id}* | grep -v "_" | grep -v ".json"`)
#shift
 
debug=0
 
#Now get the uncorrected PETs and register to user space MRI
for i in ${!items[*]}; do
        tf=`printf "${id}s%04d" $i`
        #${FSLDIR}/bin/fslreorient2std ${tdir}/${tf} ${tdir}/${id}_tmp
        ${FSLDIR}/bin/imcp ${tdir}/${tf} ${tdir}/${id}_tmp
        ${FSLDIR}/bin/flirt -ref ${wdir}/${id}_struc -in ${tdir}/${id}_tmp -omat ${tdir}/${tf}_pet2struc.mat -out ${tdir}/${tf}_reg
        #${FSLDIR}/bin/flirt -ref ${wdir}/${id}_brain -in ${tdir}/${id}_tmp -init ${tdir}/${tf}_pet2struc.mat -out ${tdir}/${tf}_reg
done
if [ ${#items[@]} -gt 1 ]; then
echo ${#items[@]}
a=`for i in ${!items[*]}; do printf " ${tdir}/${id}s%04d_reg " $i; done`
${FSLDIR}/bin/fslmerge -t ${wdir}/${id}_tmp_mvc $a
#${FSLDIR}/bin/fslmaths ${dir}/${id}_tmp_pet_in_struc -thr 0 -mas ${dir}/${id}_brain ${dir}/${id}_pet_in_struc
#${FSLDIR}/bin/fslmaths ${dir}/${id}_tmp_pet_in_struc -mas ${dir}/${id}_brain ${dir}/${id}_pet_in_struc
 
${FSLDIR}/bin/mcflirt -in ${wdir}/${id}_tmp_mvc -out ${wdir}/${id}_tmp_corr
${PIPEDIR}/bin/4dmean.pl ${wdir}/${id}_tmp_corr
${FSLDIR}/bin/flirt -ref ${wdir}/${id}_struc -in ${wdir}/${id}_mean -omat ${wdir}/${id}_fbb2struc.mat -out ${wdir}/${id}_fbb
else
tf=`printf "${id}s%04d" ${item[0]}`
${FSLDIR}/bin/mcflirt -in ${tdir}/${tf}_reg -out ${wdir}/${id}_tmp_corr
${FSLDIR}/bin/imcp ${wdir}/${id}_tmp_corr ${wdir}/${id}_fbb
fi
 
if [ $debug = 0 ] ; then
    rm ${tdir}/${id}_tmp*
    rm ${wdir}/${id}_tmp*
fi

De aqui se puede hacer lo usual, 

[osotolongo@detritus centiloid]$ fbb_correct.pl centiloid

Y podemos revisar el report, registration report Todo parece ir bien asi que, 

[osotolongo@detritus ~]$ parallel_fbb_rois_metrics.pl centiloid

Ahora solo hay que compara los valores globales de SUVR con los de la tabla de GAAIN. 

[osotolongo@detritus centiloid]$ awk -F ";" '{print $1,$2,$4}' FBB_suvr_centiloid.csv | grep -v Y | sort -n > reference.dat
[osotolongo@detritus centiloid]$ join calcs.dat reference.dat > toreview.dat

A ver que tal ese modelo, 

> d <- read.csv("toreview.dat", sep = " ", header = TRUE)
> m <- lm(d$Global ~ d$WC_suvr)
> summary(m)

Call:
lm(formula = d$Global ~ d$WC_suvr)

Residuals:
      Min        1Q    Median        3Q       Max 
-0.121024 -0.042402  0.000411  0.047290  0.126656 

Coefficients:
            Estimate Std. Error t value Pr(>|t|)    
(Intercept)  0.01999    0.05799   0.345    0.734    
d$WC_suvr    1.15167    0.03919  29.390   <2e-16 ***
---
Signif. codes:  0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1

Residual standard error: 0.07003 on 22 degrees of freedom
Multiple R-squared:  0.9752,    Adjusted R-squared:  0.974 
F-statistic: 863.8 on 1 and 22 DF,  p-value: < 2.2e-16

Voy a hacer con gnuplot que es mas facil, 

gnuplot> f(x) = m*x +n
gnuplot> fit f(x) "toreview.dat" u 2:3 via m,n
iter      chisq       delta/lim  lambda   m             n            
   0 3.6936711672e+01   0.00e+00  1.41e+00    1.000000e+00   1.000000e+00
   1 3.6992605848e-01  -9.88e+06  1.41e-01    6.105751e-01   4.583953e-01
   2 7.9414981509e-02  -3.66e+05  1.41e-02    8.423745e-01   2.635659e-02
   3 7.9329087727e-02  -1.08e+02  1.41e-03    8.467400e-01   1.870027e-02
   4 7.9329087724e-02  -3.50e-06  1.41e-04    8.467408e-01   1.869890e-02
iter      chisq       delta/lim  lambda   m             n            

After 4 iterations the fit converged.
final sum of squares of residuals : 0.0793291
rel. change during last iteration : -3.5012e-11

degrees of freedom    (FIT_NDF)                        : 22
rms of residuals      (FIT_STDFIT) = sqrt(WSSR/ndf)    : 0.0600489
variance of residuals (reduced chisquare) = WSSR/ndf   : 0.00360587

Final set of parameters            Asymptotic Standard Error
=======================            ==========================
m               = 0.846741         +/- 0.02881      (3.403%)
n               = 0.0186989        +/- 0.0497       (265.8%)

correlation matrix of the fit parameters:
                m      n      
m               1.000 
n              -0.969  1.000

Tengo un ajuste con $r^2 = 0.97$ y una pendiente de $0.85 \pm 0.02$. La diferencia en los procedimientos esta en que en nuestra pipeline, siguiendo el metodo de ADNI, se toma como region de referencia la materia gris del cerebelo y en el caso de GAAIN se toma todo el cerebelo. No obstante la correspondencia entre las mediciones es buena.

Implementando pipeline Centiloid

Con el objetivo de compara con otros estudios hemos de implementar el metodo usando las plantillas originales de Klunk et. al.. La parte buena es que el preproceso y el registro al espacio de sujeto lo tenemos hecho. Solo habria que registrar al espacio MNI y sacar las metricas usando las plantillas.

De cualquier manera voy a reescribir el proceso de registro para integrarlo en el cluster,

fbb_correct.pl
#!/usr/bin/perl
 
use strict; use warnings;
use Data::Dump qw(dump);
use File::Find::Rule;
use File::Copy::Recursive qw(dirmove);
 
use NEURO qw(populate check_subj load_study print_help get_petdata get_pair achtung shit_done check_or_make);
 
#my $study;
my $cfile;
my $sok = 0;
 
@ARGV = ("-h") unless @ARGV;
while (@ARGV and $ARGV[0] =~ /^-/) {
    $_ = shift;
    last if /^--$/;
    #if (/^-e/) { $study = shift; chomp($study);}
    if (/^-cut/) { $cfile = shift; chomp($cfile);}
    if (/^-h/) { print_help $ENV{'PIPEDIR'}.'/doc/fbb_reg.hlp'; exit;}
}
my $study = shift;
unless ($study) { print_help $ENV{'PIPEDIR'}.'/doc/fbb_reg.hlp'; exit;}
 
my %std = load_study($study);
 
my $subj_dir = $ENV{'SUBJECTS_DIR'};
 
#Run this script ONLY on "Detritus"
#or change the paths to the correct ones
 
my $w_dir=$std{'WORKING'};
#my $pet_dir = $spect?$std{'SPECT'}:$std{'PET-FDG'};
my $pet_dir = $std{'PET-FBB'};
#my $petnc_dir = $std{'FBB-NC'};
my $db = $std{'DATABASE'};
my $data_dir=$std{'DATA'};
my $outdir = "$std{'DATA'}/slurm";
check_or_make($outdir);
 
my %plist = populate($db);
my @ok_pets;
 
print "Collecting needed files\n";
my %pets;
 
if ($cfile){
	my %cuts = get_pair($data_dir."/".$cfile);
	foreach my $cut (keys %cuts){
		if(grep {/$cut/} %plist){
			$pets{$cut} = $plist{$cut};
		}
	}
}else{
	%pets = %plist;
}
 
my $err_file = $data_dir."/.fbb_errors.debug";
open ERRF, ">$err_file" or die "Could not open error file!";
 
foreach my $subject (sort keys %pets){
	my @names = find(file => 'name' => "$pets{$subject}$subject*", '!name' => '*_*', 'name' => '*.nii.gz', in => $pet_dir);	
	dump @names;
	if(@names){
		my @mri = find(file => 'name' => "brain.mgz", in => $subj_dir."/".$study."_".$pets{$subject}.$subject."/mri");
		if(@mri){
			push @ok_pets, $subject;
		}else{
			print ERRF "Subject $subject has no MRI brain extracted!!!\n";
		}
	}		
}
 
foreach my $subject (@ok_pets){
	#my @mri = find(file => 'name' => $pets{$subject}.$subject."_brain.nii.gz", in => "$w_dir/");
	my $orderfile = $outdir.'/'.$subject.'_get_subj.sh';
	my $order = $ENV{'PIPEDIR'}."/bin/get_fs_subj.sh ".$study." ".$pets{$subject}.$subject." ".$w_dir;
	open ORD, ">$orderfile";
	print ORD '#!/bin/bash'."\n";
	print ORD '#SBATCH -J fbb_correct_'.$study."\n";
	print ORD '#SBATCH --time=1:0:0'."\n"; #si no ha terminado en X horas matalo
	print ORD '#SBATCH --mail-type=FAIL,STAGE_OUT'."\n"; #no quieres que te mande email de todo
	print ORD '#SBATCH -o '.$outdir.'/fbb_get_subj-%j'."\n";
	print ORD '#SBATCH --mail-user='."$ENV{'USER'}\n";
	print ORD "srun $order\n";
	close ORD;
	my $jobid = `sbatch $orderfile`;
	$jobid = ( split ' ', $jobid )[ -1 ];
	$order = $ENV{'PIPEDIR'}."/bin/fbbtemp_reg.sh ".$study." ".$pets{$subject}.$subject." ".$pet_dir." ".$w_dir;
	$orderfile = $outdir.'/'.$subject.'_fbb_reg.sh';
	open ORD, ">$orderfile";
	print ORD '#!/bin/bash'."\n";
	print ORD '#SBATCH -J fbb_correct_'.$study."\n";
	print ORD '#SBATCH --time=1:0:0'."\n"; #si no ha terminado en X horas matalo
	print ORD '#SBATCH --mail-type=FAIL,STAGE_OUT'."\n"; #no quieres que te mande email de todo
	print ORD '#SBATCH -o '.$outdir.'/fbb_reg-%j'."\n";
	print ORD '#SBATCH --mail-user='."$ENV{'USER'}\n";
	print ORD "srun $order\n";
	close ORD;
	my $xorder = 'sbatch --depend=afterok:'.$jobid.' '.$orderfile;
	system("$xorder");
}
 
my $order = $ENV{'PIPEDIR'}."/bin/make_fbb_report.pl ".$study;
my $orderfile = $outdir.'/fbb_report.sh';
open ORD, ">$orderfile";
print ORD '#!/bin/bash'."\n";
print ORD '#SBATCH -J fbb_correct_'.$study."\n";
print ORD '#SBATCH --time=2:0:0'."\n"; #si no ha terminado en X horas matalo
print ORD '#SBATCH --mail-type=FAIL,END'."\n"; #email cuando termine o falle
print ORD '#SBATCH --mail-user='."$ENV{'USER'}\n";
print ORD '#SBATCH -o '.$outdir.'/fbb_rep-%j'."\n";
print ORD "srun $order\n";
close ORD;
my $xorder = 'sbatch --dependency=singleton'.' '.$orderfile;
exec($xorder);

Y ahora la parte nueva

Primero hago un script sencillo que registre con ANTS al espacio MNI,

fbb2std.sh
#!/bin/sh
 
id=$1
shift
 
wdir=$1
shift
 
echo "I need the FBB image at MNI space"                                                                                                                                               
ANTS 3 -m CC[${FSLDIR}/data/standard/MNI152_T1_2mm.nii.gz, ${wdir}/${id}_struc.nii.gz, 1, 4] -r Gauss[0,3] -t Elast[1.5] -i 30x20x10 -o ${wdir}/${id}_fbb_t1_mni.nii.gz
WarpImageMultiTransform 3 ${wdir}/${id}_fbb.nii.gz ${wdir}/${id}_fbb_mni.nii.gz -R ${FSLDIR}/data/standard/MNI152_T1_2mm.nii.gz ${wdir}/${id}_fbb_t1_mniWarp.nii.gz ${wdir}/${id}_fbb_t1_mniAffine.txt

la relacion reportada en el paper de referencia es tomando como ROI de referencia el cerebelo completo. Asi que solo vale la pena calcular esa.

fbb_cl_masks.pl
#!/usr/bin/perl
# Copyright 2019 O. Sotolongo <asqwerty@gmail.com>
use strict; use warnings;
 
use File::Find::Rule;
use NEURO qw(print_help get_pair load_study achtung shit_done get_lut check_or_make centiloid_fbb);
use Data::Dump qw(dump);
use File::Remove 'remove';
use File::Basename qw(basename);
 
my $ref_roi =  "voi_WhlCbl_2mm.nii";
my $ctx_roi = "voi_ctx_2mm.nii";
 
my $roi_paths = $ENV{'PIPEDIR'}.'/lib/Centiloid_Std_VOI/nifti/2mm/';
my $withstd = 0;
my $cfile;
 
@ARGV = ("-h") unless @ARGV;
 
while (@ARGV and $ARGV[0] =~ /^-/) {
    $_ = shift;
    last if /^--$/;
    if (/^-cut/) { $cfile = shift; chomp($cfile);}
}
 
my $study = shift;
unless ($study) { print_help $ENV{'PIPEDIR'}.'/doc/pet_metrics.hlp'; exit;}
my %std = load_study($study);
my $w_dir=$std{'WORKING'};
my $data_dir=$std{'DATA'};
 
our %subjects;
 
my @plist = find(file => 'name' => "*_fbb.nii.gz", '!name' => "*tmp*", in => $w_dir);
my $ofile = $data_dir."/".$study."_fbb_cl.csv";
my $patt = '([A-Z,a-z]{1,4})(\d{1,6})_fbb';
 
my @pets;
 
if ($cfile){
	my %cuts = get_pair($data_dir."/".$cfile);
	foreach my $cut (keys %cuts){
		if(grep {/$cut/} @plist){
			$pets[$cut] = $plist[$cut];
		}
	}
}else{
	@pets = @plist;
}
 
foreach my $pet (sort @pets){   
    (my $dg,my $subject) = $pet =~ /$patt/;
    if($subject){
		$subjects{$subject}{'dg'} = $dg;
		$subjects{$subject}{'pet'} = $pet;
	}
}
my %sdata;
foreach my $subject (sort keys %subjects){
	my $care;
	my $norm;
	my $dg = $subjects{$subject}{'dg'};
	# Apply masks to FBB
	my $roi_mask = $roi_paths.$ctx_roi;
	my $order = "fslstats ".$w_dir."/".$dg.$subject."_fbb_mni -k ".$roi_mask." -M";
	my $ctx = qx/$order/;
	my $roi_mask = $roi_paths.$ctx_roi;
	$order = "fslstats ".$w_dir."/".$dg.$subject."_fbb_mni -k ".$roi_mask." -M";
	print "$order\n";
	my $norm = qx/$order/;
	$subjects{$subject}{$npf.'mean'} = $ctx/$norm;	
}
 
open OF, ">$ofile";
print OF "Subject; SUVR; Centilod";
print OF "\n";
foreach my $subject (sort keys %subjects){
	print OF "$subject";
	my $mean = $subjects{$subject}{$npf.'mean'};
	print OF ";$mean";
	print OF ";", centiloid_fbb($mean);
	print OF "\n";
}
close OF;

Ahora hago un wrapper que lance todo,

fbb_cl_metrics.pl
#!/usr/bin/perl
# Copyright 2019 O. Sotolongo <asqwerty@gmail.com>
use strict; use warnings;
 
use File::Find::Rule;
use NEURO qw(print_help get_pair load_study achtung shit_done get_lut check_or_make centiloid_fbb);
use Data::Dump qw(dump);
use File::Remove 'remove';
use File::Basename qw(basename);
 
my $wcut = 0;
my $cfile;
 
@ARGV = ("-h") unless @ARGV;
 
while (@ARGV and $ARGV[0] =~ /^-/) {
    $_ = shift;
    last if /^--$/;
    if (/^-cut/) { $cfile = shift; chomp($cfile); $wcut = 1;}
    if (/^-h$/) { print_help $ENV{'PIPEDIR'}.'/doc/pet_metrics.hlp'; exit;}
}
 
my $study = shift;
unless ($study) { print_help $ENV{'PIPEDIR'}.'/doc/pet_metrics.hlp'; exit;}
my %std = load_study($study);
my $w_dir=$std{'WORKING'};
my $data_dir=$std{'DATA'};
my $outdir = "$std{'DATA'}/slurm";
check_or_make($outdir);
our %subjects;
 
my @plist = find(file => 'name' => "*_fbb.nii.gz", '!name' => "*tmp*", in => $w_dir);
my $ofile = $data_dir."/".$study."_fbb_cl.csv";
my $patt = '([A-Z,a-z]{1,4})(\d{1,6})_fbb';
 
my @pets;
 
if ($cfile){
	my %cuts = get_pair($data_dir."/".$cfile);
	foreach my $cut (keys %cuts){
		if(grep {/$cut/} @plist){
			$pets[$cut] = $plist[$cut];
		}
	}
}else{
	@pets = @plist;
}
 
 
foreach my $pet (sort @pets){   
    (my $dg,my $subject) = $pet =~ /$patt/;
    if($subject){
		$subjects{$subject}{'dg'} = $dg;
		$subjects{$subject}{'pet'} = $pet;
	}
}
 
foreach my $subject (sort keys %subjects){
	my $norm;
	my $dg = $subjects{$subject}{'dg'};
	my $subj = $dg.$subject;
	#Making sbatch scripts
	# Get FBB image into MNI space
	my $order = $ENV{'PIPEDIR'}."/bin/fbb2std.sh ".$subj." ".$w_dir;
	my $orderfile = $outdir.'/'.$subj.'_fbb_reg.sh';
	open ORD, ">$orderfile";
	print ORD '#!/bin/bash'."\n";
	print ORD '#SBATCH -J fbb2std_'.$study."\n";
	print ORD '#SBATCH --time=4:0:0'."\n"; #si no ha terminado en X horas matalo
	print ORD '#SBATCH --mail-type=FAIL,TIME_LIMIT,STAGE_OUT'."\n"; #no quieres que te mande email de todo
	print ORD '#SBATCH --mail-user='."$ENV{'USER'}\n";
	print ORD '#SBATCH -o '.$outdir.'/fbb2std-'.$subj.'-%j'."\n";
	print ORD "srun $order\n";
	close ORD;
	system("sbatch $orderfile");
}
my $order = $ENV{'PIPEDIR'}."/bin/fbb_cl_masks.pl ".$study." ".($wcut?"-cut $cfile":"");
my $orderfile = $outdir.'/fbb_masks.sh';
open ORD, ">$orderfile";
print ORD '#!/bin/bash'."\n";
print ORD '#SBATCH -J fbb2std_'.$study."\n";
print ORD '#SBATCH --time=24:0:0'."\n"; #si no ha terminado en X horas matalo
print ORD '#SBATCH --mail-type=FAIL,END'."\n"; #email cuando termine o falle
print ORD '#SBATCH --mail-user='."$ENV{'USER'}\n";
print ORD '#SBATCH -o '.$outdir.'/fbbmasks-%j'."\n";
print ORD "srun $order\n";
close ORD;
my $xorder = 'sbatch --dependency=singleton'.' '.$orderfile;
exec($xorder);
[osotolongo@detritus centiloid]$ fbb_cl_metrics.pl centiloid
.....
[osotolongo@detritus centiloid]$ squeue
             JOBID PARTITION     NAME     USER ST       TIME  NODES NODELIST(REASON)
             15944     devel fbb2std_ osotolon PD       0:00      1 (Dependency)
             15920     devel fbb2std_ osotolon  R       0:04      1 brick01
             15921     devel fbb2std_ osotolon  R       0:04      1 brick01
             15922     devel fbb2std_ osotolon  R       0:04      1 brick01
             15923     devel fbb2std_ osotolon  R       0:04      1 brick01
             15924     devel fbb2std_ osotolon  R       0:04      1 brick01
             15925     devel fbb2std_ osotolon  R       0:04      1 brick01
             15926     devel fbb2std_ osotolon  R       0:04      1 brick01
             15927     devel fbb2std_ osotolon  R       0:04      1 brick01
             15928     devel fbb2std_ osotolon  R       0:04      1 brick01
             15929     devel fbb2std_ osotolon  R       0:04      1 brick01
             15930     devel fbb2std_ osotolon  R       0:01      1 brick01
             15931     devel fbb2std_ osotolon  R       0:01      1 brick01
             15932     devel fbb2std_ osotolon  R       0:01      1 brick01
             15933     devel fbb2std_ osotolon  R       0:01      1 brick01
             15934     devel fbb2std_ osotolon  R       0:01      1 brick01
             15935     devel fbb2std_ osotolon  R       0:01      1 brick01
             15936     devel fbb2std_ osotolon  R       0:01      1 brick01
             15937     devel fbb2std_ osotolon  R       0:01      1 brick01
             15938     devel fbb2std_ osotolon  R       0:01      1 brick01
             15939     devel fbb2std_ osotolon  R       0:01      1 brick01
             15940     devel fbb2std_ osotolon  R       0:01      1 brick01
             15941     devel fbb2std_ osotolon  R       0:01      1 brick01
             15942     devel fbb2std_ osotolon  R       0:01      1 brick01
             15943     devel fbb2std_ osotolon  R       0:01      1 brick01
neuroimagen/centiloid.1555407799.txt.gz · Last modified: 2020/08/04 10:47 (external edit)